Archive for the ‘back band’ Category
Bad Ass Outfitting by Liquidlogic Kayaks
- All one contour padded construction
- UV resistant facing material
- Quick draining mesh construction
- Anti-microbial material, lets just say “less paddler stench”
- Durability you can’t rip, or tear this stuff.
Quick Access to the Back of your boat.
One of the largest issues that people bring up or try to sell against LL boats with the Bad Ass Outfitting is the ability to get into the back of our boats. What I want to do now is show you several options on how to get into the back of the boat. I think everyone will find once they know how to get in the stern of a Liquidlogic boat you will see that its easy. First thing as you can see in the above photo is that you take the back off the back band. It’s held there by a hook and loop material.
- Pull the back of the seat pad off the back band.
- Release the ratchets until the back band is all the way to the back of the cockpit rim.
- Lift the back band up and onto the back of the cockpit rim while continuing to release the ratchet. Presto magico, all the access you will ever need.
Quick Access Option
- Push the back band back a couple inches.
- Push down and towards the front of the boat on the backband.
- It will fold down flat on the seat for access. A little forceful but quick.
The Easiest Option
- Pull the back of the seat pad off the back band.
- Loosen the ratchet all the way on one side of the backband.
- Pull the loosened side up and slide gear in under the back band.
- This is a quick an easy way to get access to one side of the stern.
Hip Pad Compartment
The other part of this whole system that is very cool is the ease with which you can adjust and place your hip pads just where you want them. The hip pad compartment is easily opened by pulling the material from the cockpit rim. It opens a pocket that takes the hip pads and shims to create a proper fit. One nice trick to placing them in exactly the position you would like them is using a piece of paper, index card, or post card from Grandma as a spacer behind the hip pad so it won’t stick in place while you are trying to locate your pad. Then once it feels like its in the right place just pull the paper out and the pad sticks where you want it. This allows you to place your hip pads exactly where you want them while you are sitting in the boat.
The Paper Trick for locating your hip pad is easy to do while sitting in the boat
Hip Pad in place. Now just close the compartment.
The thigh braces are easily adjusted with just a couple turns of the screws under the outside edge of the cockpit rim next to the thigh braces. There are two screws that control the thighbraces so loosen each of them a couple turns. Then just move them where you would like and retighten the screws. This will give you more control over the feel of the thighbraces.
Important
Loosen the screws just a couple turns if you loosen more you may take the screw all the way out of its threaded nut and that can be hard to fix.
The below video is not condoned or approved by Liquidlogic However it is funny. There is poor behavior and some bad language but you gotta love the energy. Like I said don’t watch it.
Please leave any comments or questions below in the comments and I will answer them.
Thanks
Shane